Toshiba new 14TB Helium PMR Hard Drive is primarily focused for Enterprise businesses. The helium filled hard drive boosts capacity storage.
Toshiba recently took the wraps off of a new hard drive series aimed at the enterprise market. What makes the MG07ACA series interesting is that Toshiba is offering a 14 TB 3.5” drive without resorting to using Shingled Magnetic Recording.
Instead, the new MG07ACA series uses standard recording methods (CMR) and nine ~1.556 TB PMR (perpendicular magnetic recording) platters in an helium filled hermetically sealed enclosure to hit 40% more capacity and up to 50% better power efficiency than the previous MG06ACA (10 TB) series.
The new drives are also important because they represent the first foray into helium filled hard drives for Toshiba following the company pushing air breathing drives to the limit with its seven platter models.
The new drives are standard 7200 RPM models with 256 MB of cache and a SATA 6 Gbps interface. The 14 TB model is able to hit 260 MB/s sustained transfer while the slightly lower areal density of the 12 TB model puts it at a 250 MB/s transfer speed maximum.
They are able to hit 167 random 4K read IOPS and 70 random 4k write IOPS (which is fun to compare to even the slowest SSDs today, but these drives aren’t for random workloads).
Toshiba rates the drives at a fairly industry standard 550 TB per year workload and 2.5 million hours MTBF with a five year warranty. Toshiba is reportedly using its own laser welding technology to seal the drives and keep the helium contained.
The MG07ACA drives are offered in emulated 512 (512e) and 4k native sectors with the 512e models featuring Toshiba Persistent Write Cache technology to prevent data loss in the event of power failure while the drives are executing read-modify-write operations.
The power loss protection (PLP) is important for enterprise customers using these drives to upgrade the storage in their legacy software and hardware setups.
The MG07ACA series includes 14 TB 9-disk and 12 TB 8-disk drives. That’s a lot of platters in a single drive, but Toshiba claims that going this route with CMR / PMR reduces the total cost of ownership (TCO) for enterprise customers that are buying up high capacity drives for their cloud storage and big data storage needs.
The drives are allegedly more power efficient and trusted in the enterprise market as opposed to the newer shingled drives. I suppose these drives are also useful as they can be drop in upgrades of lower capacity models.
John Rydning, Research Vice President for hard disk drives at IDC was quoted in the press release in saying:
“While enterprise server and storage customers realize that shingled magnetic recording (SMR) technology can improve HDD capacity, the adoption of SMR HDD products into server and storage systems is a transition that will take several years,”
Interestingly the drives offer 1.5 TB / platter in the 12 TB model and a bit more than 1.55 TB / platter in the 14 TB drive.
With SMR technology hitting up to 1.75 TB / platter so far, using that could get a 14 TB drive with just 8 platters, but that is still fairly close that I suppose going with the longer track record of non shingled PMR and its reliability is more important to the enterprise customers.
In order to cram 9 platters into a standard 3.5″ drive, Toshiba had to make the platters thinner and move to helium instead of air.
Specifically, Toshiba is using 0.635mm Showa Denko (SDK) PMR platters that are a mere 1.58mm apart! The drives have Nidec motors on the top and bottom as well as environmental sensors and RVFF (Rotation Vibration Feed Forward) vibration compensation technology which is important when you have nine platters spinning at 7200 RPM in each drive and then hundreds of drives are placed in close proximity to each other in server racks and SANs.
The move to helium and thinner platters is a big part of the power savings in this drive with the platters being easier to spin up and exhibiting less flutter moving through the much less dense helium versus air.
Toshiba claims that the MG07ACA series uses up to 7.6 watts in normal operation and 4.6 watts at idle (0.32W/GB).